Fanttik E1 Max Precision Screwdriver: What to Check Before You Buy
You’re staring at a tray of phone screws and a furniture-driver would strip them. Fanttik’s E1 Max is the precision SKU: low electric torque, a pop-up bit box, and 50 S2 bits. It is not the S2 Pro furniture driver. If the job is cameras, watches, and phones, this is the model name to type.
Fanttik’s own comparison page says the E1 Max is not suitable for PC assembly. If you still want the precision kit, see current options while you check torque.
Our pick
Fanttik splits tools into precision E-series and furniture S-series. The E1 Max is the precision SKU with two electric gears (0.05 and 0.2 N·m) and a 50-bit magazine. That is the model to open if the screws on the table are from a phone, watch, or camera — not cabinet cams.
Skip this page if you already know you need the S2 Pro. Fanttik’s own copy says the E1 Max is not for PC assembly. Stay inside that line and see current options only when 0.05 N·m is the point of the purchase.
Official spec snapshot
From Fanttik product pages and the E1 Max manual. Re-check the live listing.
| Spec | E1 Max (Fanttik) |
|---|---|
| Electric torque | 2 gears: 0.05 / 0.2 N·m |
| Manual torque | 3 N·m (gearbox locked) |
| Speed | 200 RPM (unloaded) |
| Battery | 350 mAh, USB-C |
| Bits | 50 magnetic S2 bits, 9 categories |
| Lights | 4 LEDs |
| Extras | Pry bar + tweezers |
| Fanttik’s stated use | Camera / watch / precision repair |
| Fanttik’s stated skip | PC assembly (E1 Max page) |
Swipe sideways to compare →
E2 Max steps up to 0.05 / 0.2 / 0.4 N·m and 800 mAh. E2 Ultra adds 0.05 / 0.1 / 0.2 / 0.4 / 0.6 N·m at 270 RPM. S2 Pro starts around 0.5 N·m and goes up to furniture-range torque. Those are different jobs. See brand options only after you pick the series.
Who it’s for
People replacing a jeweler’s driver set with one rechargeable handle and a labeled bit magazine. If you already own a Giraffe Tools style outdoor kit, this is the indoor electronics cousin — small fasteners, not hoses.
When the 0.05 N·m gear is the reason you’re here, see current options.
Who should skip
- Cabinet and furniture builds: Fanttik S1 Pro / S2 Pro.
- Frequent laptop bottom-cover work: Fanttik points you at E2 Max / E2 Ultra.
- Anyone who needs a measured torque audit. We have not lab-tested these numbers.
How to choose in five minutes
- Name the fastener: phone/watch (E1 Max) vs laptop/RC (E2 Ultra) vs furniture (S2 Pro).
- If you need 0.05 N·m electric, stay in the E-series.
- Count bits: E1 Max is 50 in 9 categories; E1 Pro is 24.
- Confirm USB-C charging and the pop-up case on the current listing.
- Then see current options.
FAQ
E1 Max vs E2 Ultra? Same precision family. E2 Ultra has more torque steps (up to 0.6 N·m), more RPM, and a bigger battery. Fanttik prices them as a step-up, not a replacement for the S-series.
Can I assemble a PC with it? Fanttik’s E1 Max page says it is not intended for PC assembly. Use a higher-torque SKU they list for that job.
Are the bits magnetic? Yes — S2 steel magnetic bits, chuck and bits, per Fanttik.
For other household tools with a named SKU, the same “model first” approach shows up in our lighting and outdoor-tool pages. When you are ready, see brand options.
Final recommendation
Buy the Fanttik E1 Max if you want the 50-bit precision SKU and 0.05 / 0.2 N·m electric gears. Move to E2 Ultra or S2 Pro if the job is heavier. Confirm torque, bit count, and “not for PC assembly” on fanttik.com, then see current options.
Verify current models, specs, and policies on the official site before purchase.
Some links on this page may be affiliate links. We may earn a commission if you buy through them, at no extra cost to you.